Tag Archives: Windows Vista

Understanding The Function Of Usb Cables

Universal Serial Bus (USB) is the most popular interface in electronics for establishing communication between computers and external devices such as printers and cameras among many others. While some devices such as flash drives can plug directly into a USB port, many others depend on a USB cable to connect to computers.

USB 2.0 Cables

An upgrade of the original USB interface, 2.0 was released in 2000 and is the most common version in use today. USB 2.0 cable has the capability to transfer 480 megabits of information per second (mpbs); a data rate 40 faster than the previous version. Cameras, scanners and portable music players are some of the many electronic devices in which USB 2.0 cables are used to connect to computers.

USB to Serial Adapters

Due to worldwide use of the interface, most devices are now manufactured with USB-compatibility. However, devices such as some GPS navigation systems, sensors and loggers still rely on the use of Serial RS-232 ports. To connect to these devices, it is necessary to use a USB to serial adapter.

Before purchasing a USB to serial adapter, it is important to make sure it is compatible with your computer’s operating system. Most adapters are compatible with Windows 95, 98, 2000 and XP, but not all work with Windows Vista and Windows 7. Attempting to use a USB to serial adapter that is incompatible with your operating system can cause your computer to freeze up.

Additionally, a reliable USB adapter should:

Have a data transfer rate capability of over 500 kilobytes per second.

Provide 96 byte buffer for upstream and downstream data flow.

Offer remote support for computer performance features such as wake-up and power management.

Be compatible for use with cell phones, personal digital assistants (PDAs) digital cameras and modems.

Be free of issues that can interrupt request (IRQ) conflicts.

USB 3.0 Cable

USB 3.0 is a faster version of the interface that was released in 2010. USB 3.0 cables have a five Gigabyte per second (gbps) transfer rate, which allows files to be uploaded to computers dramatically faster than through 2.0.

USB 3.0 cables are also much more efficient with power supply management. This feature is especially beneficial for devices such as portable hard drives that require additional power from a second USB port.

Physically, USB 3.0 cable is a lot thicker than 2.0 cables due to the addition of five lines that allow for the faster transfer rate. Despite the physical differences of the new version, 3.0 cables are compatible with 2.0 ports, eliminating the need to purchase an adaptor.

This is just an overview of the capabilities provided by the most popular USB cables available on the market today. If there is uncertainty as to which cable would work for your situation, it’s best to consult a supplier of computer, networking and audio visual cables.

How Do I Uninstall the PotPlayer

Do you got to uninstall Flash player but you don’t really know how to do this? Whether you need to uninstall adobe player, Macromedia player or any other program, then you’ve come to the right place. I will help you to find out what flash player uninstaller really is the best to use. This way, you are able to easily uninstall flash programs without having a hard time.

How To Uninstall PotPlayer

There are two different ways to uninstall PotPlayer and that is through either the manual method or the automatic technique. To manually remove the program, you have to follow these steps: Select “Start” and then click “Control Panel”. After Control Panel loads up, go to “Add & Remove Programs” or “Uninstall A Program” if your system is Windows Vista & 7. This process will enable the Add & Remove Program applet to appear. From here, choose the program that needs to be deleted by ticking it from the list. Proceed by clicking “Remove”. Instructions will be displayed on your screen and you have to follow the specified actions to remove the program you chose to eliminate. Using the Add & Remove Program in removing applications does not fully take out the program.

It’s recommended that you also use a piece of software to ensure that Flash program has been removed for good. There is a tool called “Mighty Uninstaller” which is widely regarded as one of the best for the removal of the programs you may have installed. You can use Mighty Uninstaller by downloading it onto your system and then letting it remove all the parts of the Flash application that your PC will have. If you’re not confident with PCs, or have some sort of problem with the PotPlayer program, it’s recommended you use this uninstaller tool to get rid of it for good.

“> use Mighty Uninstaller by downloading it onto your system and then letting it remove all the parts of the Flash application that your PC will have. If you’re not confident with PCs, or have some sort of problem with the PotPlayer program, it’s recommended you use this uninstaller tool to get rid of it for good.

“>Do you got to uninstall Flash player but you don’t really know how to do this? Whether you need to uninstall adobe player, Macromedia player or any other program, then you’ve come to the right place. I will help you to find out what flash player uninstaller really is the best to use. This way, you are able to easily uninstall flash programs without having a hard time.

How To Uninstall PotPlayer

There are two different ways to uninstall PotPlayer and that is through either the manual method or the automatic technique. To manually remove the program, you have to follow these steps: Select “Start” and then click “Control Panel”. After Control Panel loads up, go to “Add & Remove Programs” or “Uninstall A Program” if your system is Windows Vista & 7. This process will enable the Add & Remove Program applet to appear. From here, choose the program that needs to be deleted by ticking it from the list. Proceed by clicking “Remove”. Instructions will be displayed on your screen and you have to follow the specified actions to remove the program you chose to eliminate. Using the Add & Remove Program in removing applications does not fully take out the program.

It’s recommended that you also use a piece of software to ensure that Flash program has been removed for good. There is a tool called “Mighty Uninstaller” which is widely regarded as one of the best for the removal of the programs you may have installed. You can use Mighty Uninstaller by downloading it onto your system and then letting it remove all the parts of the Flash application that your PC will have. If you’re not confident with PCs, or have some sort of problem with the PotPlayer program, it’s recommended you use this uninstaller tool to get rid of it for good.

Fix MsMpEng.exe Error – How to Fix MsMpEng.exe Error Completely within Minutes

What is MsMpEng.exe error?

MsMpEng.exe error is a common .exe error that is associated with MsMpEng.exe. MsMpEng.exe stands for Service Executable and is a system process that belongs to Microsoft system security products, including Windows Defender or Microsoft Malware Protection or Microsoft Security Essentials or Windows Defender Service or Microsoft Antimalware Service or Microsoft Antimalware. The associated files of MsMpEng.exe contain mpclient.dll, mpsigdwn.dll, mpasdesc.dll, msmpcom.dll, MsMpRes.dll, mpoav.dll, MSASCui.exe, mpcmdrun.exe, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderDisableAntiSpyware, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderReal-Time ProtectionEnableUnknownPrompts, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderScanCheckForSignaturesBeforeRunningScan, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderSignature UpdatesForceFullUpdate, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderReportingDisableLoggingForKnownGood, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderReportingDisableLoggingForUnknown, HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderSpyNetSpyNetReporting and HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows DefenderSignature UpdatesCheckAlternateDownloadLocation.

What causes MsMpEng.exe error? MsMpEng.exe error can be caused by a list of system issues: Missing or damaged MsMpEng.exe Corrupt MsMpEng.exe removal/repair failure Incompatible version of MsMpEng.exe Undesirable damage onto associated files mentioned above Corrupt program install/uninstall Driver file damage Driver update failure Incorrect modification on Windows registry Malware attacks Irregular removal of Microsoft security programs and files

Possible behaviors of MsMpEng.exe error: MsMpEng.exe error can result in multiple system problems, including: Drastic deterioration of computer speed Inexplicable loss of network bandwidth Program install/uninstall failure Unexpected Blue Screen of Death errors Irregular increase of system errors Increasing times of Microsoft security program crashes Network connection failure Software instability System components removal failure Undesired Black Screen of Death pops- up Microsoft security program removal failure

Common MsMpEng.exe error messages:

Service Executable has encountered a problem and needs to close. MsMpEng.exe szAppVer: 1.5.1958.0 szModName MpSvc.dll

MsMpEng.exe – Application Error The instruction at -0x7c911daa- referenced memory at -0x02dba000?. The required data was to be placed into memory because of an I/O errorstatus of -0x000009c-. Click OK to terminate or Cancel to debug.

MsMpEng.exe – Application Error The instruction at -0x0b2a7b63? referenced memory at -0xff000113?. The memory cannot be read. Click OK to terminate or Cancel to debug.

MsMpEng.exe – Application Error The instruction at -0x7c911c48? referenced memory at -0x0031005c-. The memory cannot be read. Click OK to terminate or Cancel to debug.

How to fix MsMpEng.exe error efficiently? Solution One: Replace it with a compatible one from cyber space. Step One: Download the compatible version of MsMpEng.exe from network. Step Two: Save it onto a hard disk. And then go to the folder C:Program Files Windows Defender. Step Three: Locate the problematic version of MsMpEng.exe on your computer. Step Four: Rename the current version of MsMpEng.exe with a name you like. Step Five: Copy & paste the compatible version into the folder C:Program Files Windows Defender. Step Six: Click Start and then head to Run. Step Seven: Type cmd onto the latest pop- up and press Enter button to go into the Command mode. (In Windows 7, type cmd onto the latest search box above Windows menu.) Step Eight: Type -regsvr32 MsMpEng.exe- onto Command Prompt and then press -Enter- button.

Solution Two: Re- register associated .dll files of MsMpEng.exe. In order to fix MsMpEng.exe error, you may consider trying to re- registering the associated .dll files of MsMpEng.exe if they haven’t been damaged by any undesirable activity or compromised by malware. You can follow the easy instructions to re- register mpoav.dll: For Windows XP user: Step One: Click Start, and then click Run. Step Two: Type cmd onto the latest dialog box and press Enter button to enable Command Prompt utility. Step Three: Type regsvr32 mpoav.dll onto the Command Prompt window as soon as it pops up. Step Four: Press Enter to confirm the modification.

For Windows 7 user: Step One: Click Windows or Start if you are using Classic theme. Step Two: Type cmd onto the latest search box above Windows menu. Step Three: As soon as the Command Prompt appears on the screen, type regsvr32 mpoav.dll Step Four: Press Enter.

Solution Three: Disable Error Reporting utility. Disabling Error Reporting utility cannot help you fix MsMpEng.exe error, but only help you temporarily get rid of it. For Windows XP user: Step One: Click Start, and then browse to Control Panel. Step Two: Choose Performance and Maintenance option. Step Three: Under or pick a Control Panel icon, click System. Step Four: From System Properties, click Advanced. Step Five: from bottom of the pop- up, click Error Reporting. Step Six: In the Error Reporting window that appears, click Disable error reporting and then click OK. Step Seven: Click OK under the System Properties. Step Eight: Close the Control Panel or Performance and Maintenance dialog box. For Windows 7 and Windows Vista user: Step One: Enable Local Group Policy Editor by typing gpedit.msc in the Start Search dialog box and press Enter. Step Two: Navigate to Computer Configuration > Administrative Templates > Systems > Internet Communication Management > Internet Communication Settings. Obviously you must have administrator privilege before making any changes. From the main window, select Turn Off Windows Error Reporting and Enable it. Step Three: Double click to confirm the modification- Disable Windows Error Reporting. Step Four: Click Ok and close the Group Policy Editor.

Solution Four: Fix registry problems completely. A problematic Windows registry full of unnecessary registry components, annoying registry errors and corrupt registry files has the ability to result in a list of further dangerous system problems, including abrupt system performance decrease, network connection failure, increasing times of program crashes and crucial system file damage. This is due to the fact that the Windows registry plays the crucial role in Windows operating system. It contains setting and options for lower- level system components and third- party program running at the platform. If you wish to totally fix MsMpEng.exe error, it is suggested to firstly get rid of the registry problems located on your computer.

How to fix MsMpEng.exe error and get rid of registry problems efficiently? A perfect and safe solution for the problems is to install a highly trusted registry repair tool on your computer. A highly trusted registry repair tool combines with a collection of professional utilities that can help you safely repair broken registry files, fix obscure registry errors and wipe out the entire undesirable remove components. How to fix MsMpEng.exe error and get rid of unwanted registry problems safely and efficiently?

Fix windows Boot Configuration Data File Is Missing Error

As we all know that Microsoft’s Windows based Operating Systems are one of the commonly used operating system all over the world but these operating systems is exposed to several threats.

Some of the common issue associated with Windows based computers are
1 Malfunction of operating system due to the Virus or other malwares.
2 Due to the corruption of the registry or some other files.

If all these get issue get more severe it lead to no boot issue , one of the common issue with Windows based operating system is Windows boot configuration data file is missing

Symptoms of this error
When we start our operating, we receive the following error message.
File: BootBCD
Status: 0xc0000034

Causes for this Error
This error is caused due to the following reasons.
1 The Windows Boot Manager (Bootmgr) entry is not present in the Boot configuration data (BCD) store.
2 The BootBCD file on the active partition is damaged or missing.

How to solve this Error.

Method 1:
1 Repair the BCD store by using the Startup Computer Repair option
You can use the Startup Repair option in the Windows Recovery Environment to repair the BCD store. To do this, follow these steps:
1 Put the Windows Vista support installation disc in the disc drive, and then starts the computer.
2 Press a key when you are prompted.
3 Select a language, a time, a currency, and a keyboard or another input method, and then click next.
4 Click Repair your computer.
Click the operating system that you want to repair, and then click next.
5 In the System Recovery Options dialog box, click Startup Repair.
6 Restart the computer.

Method 2:
Rebuild the BCD store by using the Bootrec.exe tool
If the previous method does not resolve the problem, you can rebuild the BCD store by using the Bootrec.exe tool in the Windows Recovery Environment. To do this, follow these steps:
1 Put the Windows Vista installation disc in the disc drive, and then starts the computer.
2 Press a key when you are prompted.
3 Select a language, a time, a currency, and a keyboard or another input method, and then click next.
4 Click Repair your computer.
5 Click the operating system that you want to repair, and then click next.
6 In the System Recovery Options dialog box, click Command Prompt.
7 Type Bootrec /RebuildBcd, and then press ENTER.
If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory. To add the entry to the BCD store, type yes. A confirmation message appears that indicates the entry was added successfully.
If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.
Bcdedit /export C:BCD_Backup
ren c:bootbcd bcd.old
Bootrec /rebuildbcd
8 Restart the computer.

If we are not able to solve this error by both the above methods then try method 3

Method 3:
Rebuild the BCD store manually by using the Bcdedit.exe tool
If the previous method does not resolve the problem, you can rebuild the BCD store manually by using the Bcdedit.exe tool in the Windows Recovery Environment. To do this, follow these steps:
1 Put the Windows Vista installation disc in the disc drive, and then starts the computer.
2 Press a key when you are prompted.
3 Select a language, a time, a currency, and a keyboard or another input method, and then click next.
4 Click Repair your computer.
5 Click the operating system that you want to repair, and then click next.
6 In the System Recovery Options dialog box, click Command Prompt.
7 Type the following command, and then press ENTER:

cd /d Partition:WindowsSystem32

8 Type the following command, and then press ENTER:
bcdedit /enum all
9 In the Windows Boot Loader section of the output from this command, note the GUID that is listed for resumeobject. You will use this GUID later.
10 Type the following command, and then press ENTER:
bcdedit -create {bootmgr} -d “Description”
11 Type the following command, and then press ENTER:
bcdedit -set {bootmgr} device partition=Partition:

12 Type the following command, and then press ENTER:
bcdedit /displayorder {GUID}

13 Type the following command, and then press ENTER:
bcdedit /default {GUID}

14 Type the following command, and then press ENTER:
bcdedit /timeout Value

15 Restart the computer.

How Do I Backup My Computer – 3 Ways To Backup

How Do I Backup My Computer ? This is a very common asked by so many of my clients. There are dozens of ways to backup your computer and in this article I’m going to show you how to perform 3 of them. And they are…..

1. Backing up to CD or DVD.
2. Backing up to an external hard drive.
3. Backing up to secure online storage.

All 3 of these methods are not free, however they won’t “break the bank” either.

CD’s and DVD’s are very cheap (sometimes free), external hard drives can be found for less than $100 now and online backups are only about $50/year.

Not all backup methods are created equal. I’ll give you the pro’s and con’s for each one of them.

Why You Need To Backup Your Computer

Currently, hard drives in desktops or laptops have a limited lifespan and WILL fail after 2-3 years (sometimes earlier than that). When your hard drive fails there is a pretty good chance all your data will be unretrievable.

Hard drive failure isn’t the only reason to backup your computer, other data disasters can happen such as:

* fire
* flood
* theft
* accidental file modification
* accidental or intetentional file deletions

Those are just a few of the ways you can lose all your documents, pictures, music and so on.

Backup Your Computer To CD or DVD

Backing up to CD or DVD involves copying data such as your pictures to a blank CD or DVD disc.

Requirements:

* CD or DVD burner drive. Most computers that were made in the last 5 years usually have at least a CD burner. DVD burners are very affordable (some are as cheap as $40.00).
* Blank CD’s – Holds 700 Megabytes
* Single Layer DVD’s – 4.4 Gigabytes
* Dual Layer DVD’s – 8.5 Gigabytes

Pros:

* It’s cheap. CD’s and DVD’s cost almost nothing these days. Burners are very affordable as well.
* It’s very easy to burn a few files or folders.
* Backups are small and portable.
* Backups are safely accessable for 5 years.

Cons:

* It’s not automatic.
* Disc’s are easily scratched and may become unreadable if not taken care of properly.
* Succeptable to fire, flood, theft and damage.
* Large backups can take an hour or more.

How to burn a file or folder (easily):

1. Insert a blank CD or DVD into your burner.
2. Right click a file, folder or group of files and folders then select “Send To” and choose your CD DVD RW drive.
3. A prompt will pop up asking you to give the disc a name. Give it name and click Next.
4. Windows will now format the disc and begin burning it.
5. Eject the disc to complete the burning process.
6. Congratulations! You’ve just burned data to a disc. You may continue to add data to the disc until it’s full (see disc limits above).

Backup Your Computer To An External Hard Drive

Backing up your computer to an external USB hard drive is one of the most popular ways to backup these days. Simply purchase an external USB hard drive, plug it into a USB port on your computer and boom…instant storage!

There are 2 types of external USB hard drives. One drive requires an AC adapter and the other does not (it’s simply powered by the USB cable). Drives that require an AC adapter are usually larger and faster.

Requirements:

* 1 external USB hard drive.
* 1 USB cable.
* 1 USB 2.0 port on your computer.
* AC Adapter if the hard drive came with one.

How to install your external USB drive:

1. Plugin the USB cable to the back of the external hard drive.
2. Plugin the other end of the USB cable to an open USB 2.0 port on your computer.
3. If necessary plugin the AC adapter to a power strip and connect the other end to the external hard drive.
4. If there is an ON/OFF switch make sure it’s set to the ON position.
5. You may now hear your computer make some “found new device” sounds and you’ll see some balloon popups saying that your computer is installing a new device.
6. After the balloon messages go away (about 30-60 seconds) open your “My Computer” in Windows XP or “Computer” in Windows Vista and you should see your external hard drive. It’s most likely labeled D: or E: but can be any drive letter.

How to backup files and folders to your external USB hard drive:

1. Now it’s time to perform our first backup. Please keep in mind that there are many ways to backup data to your external hard drive and I’m going to show you one of the easiest ones.
2. Right Click any file or folder and select “Send To”, then choose your external hard drive. Windows will now copy that file or folder to your external hard drive.
3. Simple huh! Just remember to backup your important files and folders often. If you’re asked to overwrite backed up files and folders just say yes or “copy and replace”.

Pros:

* You can backup lots and lots of files.
* External hard drives are portable.
* Very easy to install and use.
* 1 time fee.

Cons:

* It’s not automatic.
* Prone to hard drive failure…it’s just a hard drive after all.
* Often infected by USB worms if you “pass it around”.
* Susceptible to fire, flood, theft and damage.

Backup Your Computer To Online Storage

Backing up your computer online is the latest (and greatest) form of personal backup. Let’s go over all the pros and cons first.

Pros:

* Automatic Backups ensure you’ll never have to remember to do that backup. Everytime you add a new file to your computer, Carbonite (my online backup software), will immediately back it up.
* All files are encrypted. Only you can access, download and read your files.
* Unlimited space. Backup as much as you want!
* Backups are “off site”. You’ll never have to worry about fire, floods, theft, damage and file deletions.
* Does not require any expensive equipment.
* It’s cheap, at only $49.99 per year for unlimited secure storage!
* Files will have little green dots on them so you know they are backed up.

Cons:

* requires a broadband internet connection

How to get started with Carbonite Online Backup:

1. Go to Carbonite.com.
2. Look over to the right and you’ll see “Start Your Risk-Free Trial”.
3. Enter your email address and any password you’d like to use (twice).
4. Click “Start Your Free Trial”.
5. Enter how you heard about Carbonite.
6. Click the “Install Now” Button.
7. Click Run.
8. Click Run again.
9. Click the OK button to refresh your desktop.
10. Click Next on the Welcome To Carbonite window.
11. Click Next again to have Carbonite backup your documents folder (this folder contains documents, pictures, music and videos) and desktop.
12. Click Next 2 more times and then click the done button.
13. Now you’ll notice a little yellow lock in your system tray. The yellow lock indicates that Carbonite is backing up your “My documents” folder and Desktop. Once the backup is complete that lock will turn green.

Note: Your first backup can take days (or even weeks) depending on how many files you are backing up. After that initial backup future backups will only take a few minutes.

How To Map To An Nas Drive From Windows Vista

This article explains how to “map” to a NAS drive attached to your local network in Windows Vista. A NAS(Network Attached Storage) drive is an extra hard drive that can be plugged into your home network and accessed from any computer – although originally intended as data backup devices, many NAS drives are sold as media drives, allowing you to store all of your music, photographs and videos in one place, and then “streaming” the content to computers and media players anywhere in your home. These devices simply plug into your router with a standard Ethernet cable and become instantly visible to any computer on the network. “Mapping” is the process whereby your computer makes a connection to such a device.

To prevent unauthorised access to such information, most NAS drives require you to enter a username and password when you first attempt to “map” to the drive. Windows Vista helpfully offers to remember this username and password for you, so you don’t have to re-input the information every time you boot up your computer. However, there is a problem: it doesn’t work. This leaves users with the frustrating problem of re-keying in data every time the computer is turned on or off.

There is a solution, however. Start up a simple editing program like Notepad – avoid using a word processor, such as Word here, because you want to save the document in the simplest file format possible. Now enter the following lines:

echo off
echo Mapping media server…
net use \drivename password /user:username

To find out your drive name, make sure your NAS drive is turned on and attached to the network. Now double click on “Computer” on the desktop, then select “Network” in the Folders pane. Wait a moment, and then in the right-hand pane you should see your NAS drive (it may take a few seconds to appear). You will now see the text to enter for drivename (for instance, LS-MEDIA).

The username and password sections are the username and password you use to access the drive. If you are unsure what these values are, check the manual that accompanied your network drive. In this example, we will assume they are “admin” and “mypassword”. (Note that this method of mapping is really only suitable for home networks, because although the “echo off” line hides the username and password being printed every time the script is run, it can easily be accessed by anyone who has logged into the machine.)

Given this information, the text we would type would be:

echo off
echo Mapping media server…
net use \LS-MEDIA mypassword /user:admin

Now save this file and call it something like “mapdrive.bat”. The .bat extension is important, because it tells Windows that the file is a script that contains commands and can be run; be careful here, because programs like Notepad will automatically add a .txt extension unless you explicitly type .bat after the filename. Now place a copy of this script in All Programs->Startup (right click on the Windows button, select “Open all users”, click on “Programs”, then “Startup”, then copy and paste your script inside this folder). Now, every time you start your computer, Windows Vista will automatically map your network drive and enter the name and password for you – meaning that when you start programs like iTunes or Windows Media Player, you will have full access to your media collection without retyping information.